Pengguna memb2ers


Usia keanggotaan:	3 tahun (since 9 Okt 2021)
Jenis:	Pengguna terdaftar
Situs web:	http://www.beeautomobile.com/
Bio:	How Fuel Injection Systems Work In trying to keep up with emissions and fuel efficiency laws, the fuel system used in modern cars has changed a lot over the years. The 1990 Subaru Justy was the last car sold in the United States to have a carburetor; the following model year, the Justy had fuel injection. But fuel injection has been around since the 1950s, and electronic fuel injection was used widely on European cars starting around 1980. Now, all cars sold in the United States have fuel injection systems. In this article, we'll learn how the fuel gets into the cylinder of the engine, and what terms like "multi-port fuel injection" and "throttle body fuel injection" mean. For most of the existence of the internal combustion engine, the carburetor has been the device that supplied fuel to the engine. On many other machines, such as lawnmowers and chainsaws, it still is. But as the automobile evolved, the carburetor got more and more complicated trying to handle all of the operating requirements. For instance, to handle some of these tasks, carburetors had five different circuits: Main circuit - Provides just enough fuel for fuel-efficient cruising Idle circuit - Provides just enough fuel to keep the engine idling Accelerator pump - Provides an extra burst of fuel when the accelerator pedal is first depressed, reducing hesitation before the engine speeds up Power enrichment circuit - Provides extra fuel when the car is going up a hill or towing a trailer Choke - Provides extra fuel when the engine is cold so that it will start In order to meet stricter emissions requirements, catalytic converters were introduced. Very careful control of the air-to-fuel ratio was required for the catalytic converter to be effective. Oxygen sensors monitor the amount of oxygen in the exhaust, and the engine control unit (ECU) uses this information to adjust the air-to-fuel ratio in real-time. This is called closed loop control -- it was not feasible to achieve this control with carburetors. There was a brief period of electrically controlled carburetors before fuel injection systems took over, but these electrical carbs were even more complicated than the purely mechanical ones. At first, carburetors were replaced with throttle body FIAT fuel injector systems (also known as single point or central fuel injection systems) that incorporated electrically controlled fuel-injector valves into the throttle body. These were almost a bolt-in replacement for the carburetor, so the automakers didn't have to make any drastic changes to their engine designs. Gradually, as new engines were designed, throttle body fuel injection was replaced by multi-port fuel injection (also known as port, multi-point or sequential fuel injection). These systems have a fuel injector for each cylinder, usually located so that they spray right at the intake valve. These systems provide more accurate fuel metering and quicker response. When You Step on the Gas The gas pedal in your car is connected to the throttle valve -- this is the valve that regulates how much air enters the engine. So the gas pedal is really the air pedal.

Aktivitas oleh memb2ers

Skor:	100 poin (peringkat #61)
Pertanyaan:	0
Jawaban:	0
Komentar:	0
Memberi suara pada:	0 pertanyaan, 0 jawaban
Memberikan:	0 suara mendukung, 0 suara menolak
Menerima:	0 suara mendukung, 0 suara menolak

Wall for memb2ers

This user has disallowed new posts on their wall

...